Illustrative photoPA-ON probe – with or without software
Digital periodontal probe with constant probing force: the periodontal chart is recorded, documented and archived automatically – no chairside assistant needed to take notes.
What the probe does
- Pocket depth and recession in one pass – attachment loss is calculated automatically.
- Measure quadrant by quadrant: six sites per tooth; you enter the bleeding values at the end of each quadrant.
- Constant probing force 20 g (0.2 N) – the same for every measurement, so findings remain comparable over months.
- Automatic transfer to the periodontal chart – no note-taking, no retyping, no second person.
- Voice output optional: the probe can announce each measuring site. It can be switched off – in practice hardly anyone uses it.
- 10 probe tips included – you can get started straight away.
What is included in the price
All-inclusive price €3,370.00 net with software
| PA-ON probe (OrangeDental) | ✓ included |
|---|---|
| ByZZ Paro software | ✓ included (version “with software”) – without software €2,659.00 if ByZZ Paro is already installed |
| Online installation and introduction to the settings by OrangeDental | ✓ included |
| Interface to the practice management software | not included – provided by your practice software vendor, please clarify in advance |
| On-site installation | not included – on request, charged separately |
| Probe tips | ✓ 1 pack (10 pieces) included – reorder from 1 pack |
Limitations – to be honest
Peri-implantitis: only suitable to a limited extent. According to the manufacturer, the probing needle can catch on implant threads – continue to probe manually there.
Testing: only meaningful live on a patient or on yourself.
What happens after you order
- Order – we ask which practice software you use
- Clarifying the interface with your practice software vendor
- Delivery (approx. 14 days)
- Online installation by OrangeDental
- Introduction to the settings
When does the probe pay off?
The defaults are typical values from practices with six measuring sites per tooth. Enter your own figures.
Simplified calculation: price of the selected version (with software €3,370.00, without €2,659.00 net) divided by the value of the staff time gained. With two people, both are counted. The times refer to 28 teeth and are converted to your number of teeth. Many practices set the value of a treatment hour too low – calculated properly, it is usually well above the fee for a prophylaxis session.
Where the time saving comes from
- Measure six sites per tooth
- Remember the values – or write down each value individually
- Note bleeding for each site
- Next tooth – with 28 teeth, 168 measuring sites
- At the end, transfer everything into the software by hand
- One person measures and calls out the values
- The second writes them down or types them in
- Faster – but two paid staff: again approx. 60 minutes of staff time
- Measure quadrant by quadrant, six sites per tooth
- Pocket depth and recession in one pass
- Enter bleeding values at the end of each quadrant
- Values go straight into the periodontal chart – one person, no retyping
The saving comes again and again
The periodontal chart is not recorded just once, but continuously for every periodontal patient:
- Initial examination before treatment.
- Re-evaluation – has the situation improved, is regeneration taking place?
- Every recall in supportive periodontal therapy: every three months at first, every six months once findings are stable.
Only this way can you see whether the result is maintained – if you stop measuring at recall, you may miss new activity. An X-ray does not replace this: it is not taken at every recall and does not show every pocket.
What to do with the time gained
- Treat another patient – the time freed up goes into billable treatment.
- Bill the periodontal chart – as a separate service, depending on your fee agreement.
- Ease the load on flat-rate packages – if the measurement is included in the package, your effort per patient drops.
- No second person needed – the assistant who used to take notes is free for other tasks.
Why 20 grams matter
The specialist literature recommends a probing force of about 0.2–0.25 N for pocket probing. By hand it is hardly possible to keep exactly to this force at every measurement – depending on the tissue and site, you unconsciously press harder or more lightly. The PA-ON probe measures constantly at 20 g (0.2 N). This makes values comparable from the initial examination to recall, and changes become visible.
FAQ
What does a digital periodontal probe really cost?
With us €3,370.00 net as an all-inclusive price – probe including ByZZ Paro software and the first 10 probe tips. Without the software, the probe cannot be used by most practices. When comparing offers, check whether the software is included. If you already use ByZZ Paro, the probe without software costs €2,659.00 net.
I already have an OrangeDental device – do I need the software again?
No. If your practice already uses ByZZ Paro software, order the version without software for €2,659.00 net. The 10 probe tips are included here too.
Does the probe work with my practice software?
The connection to your practice software is set up by your practice software vendor via an interface. Please clarify this with them in advance – we ask about your software when you order and support you.
Is the probe suitable for implants?
Only to a limited extent. According to the manufacturer, the probing needle can catch on implant threads. For peri-implantitis, continue to probe manually.
Can I test the probe beforehand?
The probe can only be tested meaningfully live on a patient or on yourself. A demonstration is possible as part of a Clean&Seal training session – request it below.
Are probe tips included?
Yes, we include the first pack of 10 single-use probe tips at no extra charge. This lets you get started straight away. After that you reorder, 10 pieces per pack, from 1 pack.
Why should I record the periodontal chart at every recall?
Only repeated measurement shows whether findings remain stable or activity returns. Measurement is recommended at the initial examination, at re-evaluation and at every recall – every three months at first, every six months once findings are stable. With the PA-ON probe this takes far less time.
Does an X-ray replace pocket measurement?
No. An X-ray is not taken at every recall and does not show every pocket. You can only record the condition of the pockets by probing.
Why is a constant probing force important?
A force of about 0.2–0.25 N is recommended for pocket probing. By hand, the force varies from one measurement to the next. The PA-ON probe measures constantly at 20 g (0.2 N), so values remain comparable across all check-ups.
Do I have to use the voice output?
No. The probe can announce each measuring site, which is helpful at the beginning. The announcement can be switched off – in practice hardly anyone uses it.
Request a demonstration
A demonstration is possible as part of a Clean&Seal training session. We will get in touch to arrange a date.
Products and services from Tyrol

